首页  学院概况  师资队伍  本科生教学  研究生培养  科学研究  学科与实验室  国际合作  党群工作  学生工作 
 
科研动态
 科研概况 
 科研方向 
 科研项目 
 科研成果 
 科研机构 
 科研动态 
 资源下载 
 
 
当前位置: 首页>>科学研究>>科研动态>>正文
机电学院公布2015年度代表性论文
2016-06-03 14:20  

机电学院经过认真审议,综合考虑论文学术水平、期刊水平和影响力,从本学院2015年发表的156篇SCI检索论文中遴选出13篇代表性论文,现予以公布。

(以第一作者姓氏拼音顺序排名)

1.

常洪龙,王沙沙,苑伟政等

Chang H, Gong X, Wang S, et al. On Improving the Performance of a Triaxis Vortex Convective Gyroscope Through Suspended Silicon Thermistors[J]. IEEESensors Journal, 2015, 15(2): 946-955.

2.

邓超,蒋建军,刘发,方良超,王俊彪,李德佳,吴建军

Deng C, Jiang J, Liu F, et al. Influence of carbon nanotubes coatings onto carbon fiber by oxidative treatments combined with electrophoretic deposition on interfacial properties of carbon fiber composite[J]. Applied Surface Science, 2015, 357: 1274-1280.

3.

兑红炎,司书宾等

Dui H, Si S, Zuo M J, et al. Semi-Markov process-based integrated importance measure for multi-state systems[J]. IEEE Transactions on Reliability, 2015, 64(2): 754-765.

4.

高欢欢,朱继宏,张卫红,周莹

Gao H H, Zhu J H, Zhang W H, et al. An improved adaptive constraint aggregation for integrated layout and topology optimization[J]. Computer Methods in Applied Mechanics and Engineering, 2015, 289: 387-408.

5.

侯永锋,张定华,吴宝海,罗明

Hou Y, Zhang D, Wu B, et al. Milling Force Modeling of Worn Tool and Tool Flank Wear Recognition in End Milling[J]. IEEE/ASME Transactions on Mechatronics, 2015, 20(3): 1024-1035.

6.

黄瑞,张树生等

Huang R, Zhang S, Xu C, et al. A flexible and effective NC machining process reuse approach for similar subparts[J]. Computer-Aided Design, 2015, 62: 64-77.

7.

李天成等

Li T, Bolic M, Djuric P M. Resampling methods for particle filtering: classification, implementation, and strategies[J]. IEEE Signal Processing Magazine, 2015, 32(3): 70-86.

8.

齐乐华,钟宋义,罗俊,左寒松等

Qi L, Zhong S, Luo J, et al. Quantitative characterization and influence of parameters on surface topography in metal micro-droplet deposition manufacture[J]. International Journal of Machine Tools and Manufacture, 2015, 88: 206-213.

9.

宋丹龙,李原,张开富,程晖,吴涛

Song D, Li Y, Zhang K, et al. Stress distribution modeling for interference-fit area of each individual layer around composite laminates joint[J]. Composites Part B: Engineering, 2015, 78: 469-479.

10.

万敏等

Wan M, Kilic Z M, Altintas Y. Mechanics and dynamics of multifunctional tools[J]. Journal of Manufacturing Science and Engineering, 2015, 137(1): 011019.

11.

汪焰恩等

Wang Y, Li X, Li C, et al. Binder droplet impact mechanism on a hydroxyapatite microsphere surface in 3D printing of bone scaffolds[J]. Journal of Materials Science, 2015, 50(14): 5014-5023.

12.

杨昀,张卫红,马颖超,万敏

Yang Y, Zhang W H, Ma Y C, et al. Generalized method for the analysis of bending, torsional and axial receptances of tool–holder–spindle assembly[J]. International Journal of Machine Tools and Manufacture, 2015, 99: 48-67.

13.

张映锋,杜微,王军强,孙树栋等

Zhang Y, Zhang G, Du W, et al. An optimization method for shopfloor material handling based on real-time and multi-source manufacturing data[J]. International Journal of Production Economics, 2015, 165: 282-292.

论文下载:

附件【机电学院2015年代表性论文.pdf
关闭窗口

版权所有 © 西北工业大学机电学院   技术支持:网络与教育技术中心 联系我们:npujdxy@nwpu.edu.cn