2.

邓超，蒋建军，刘发，方良超，王俊彪，李德佳，吴建军

Deng C, Jiang J, Liu F, et al. Influence of carbon nanotubes coatings onto carbon fiber by oxidative treatments combined with electrophoretic deposition on interfacial properties of carbon fiber composite[J]. Applied Surface Science, 2015, 357: 1274-1280.

3.

兑红炎，司书宾等

Dui H, Si S, Zuo M J, et al. Semi-Markov process-based integrated importance measure for multi-state systems[J]. IEEE Transactions on Reliability, 2015, 64(2): 754-765.

4.

高欢欢，朱继宏，张卫红，周莹

Gao H H, Zhu J H, Zhang W H, et al. An improved adaptive constraint aggregation for integrated layout and topology optimization[J]. Computer Methods in Applied Mechanics and Engineering, 2015, 289: 387-408.

5.

侯永锋，张定华，吴宝海，罗明

Hou Y, Zhang D, Wu B, et al. Milling Force Modeling of Worn Tool and Tool Flank Wear Recognition in End Milling[J]. IEEE/ASME Transactions on Mechatronics, 2015, 20(3): 1024-1035.

6.

黄瑞，张树生等

Huang R, Zhang S, Xu C, et al. A flexible and effective NC machining process reuse approach for similar subparts[J]. Computer-Aided Design, 2015, 62: 64-77.

7.

李天成等

Li T, Bolic M, Djuric P M. Resampling methods for particle filtering: classification, implementation, and strategies[J]. IEEE Signal Processing Magazine, 2015, 32(3): 70-86.

8.

齐乐华，钟宋义，罗俊，左寒松等

Qi L, Zhong S, Luo J, et al. Quantitative characterization and influence of parameters on surface topography in metal micro-droplet deposition manufacture[J]. International Journal of Machine Tools and Manufacture, 2015, 88: 206-213.

9.

宋丹龙，李原，张开富，程晖，吴涛

Song D, Li Y, Zhang K, et al. Stress distribution modeling for interference-fit area of each individual layer around composite laminates joint[J]. Composites Part B: Engineering, 2015, 78: 469-479.

10.

万敏等

Wan M, Kilic Z M, Altintas Y. Mechanics and dynamics of multifunctional tools[J]. Journal of Manufacturing Science and Engineering, 2015, 137(1): 011019.

11.

汪焰恩等

Wang Y, Li X, Li C, et al. Binder droplet impact mechanism on a hydroxyapatite microsphere surface in 3D printing of bone scaffolds[J]. Journal of Materials Science, 2015, 50(14): 5014-5023.

12.

杨昀，张卫红，马颖超，万敏

Yang Y, Zhang W H, Ma Y C, et al. Generalized method for the analysis of bending, torsional and axial receptances of tool–holder–spindle assembly[J]. International Journal of Machine Tools and Manufacture, 2015, 99: 48-67.

13.

张映锋，杜微，王军强，孙树栋等

Zhang Y, Zhang G, Du W, et al. An optimization method for shopfloor material handling based on real-time and multi-source manufacturing data[J]. International Journal of Production Economics, 2015, 165: 282-292.